21
VP10RT
GY
Holder
GYHL2525M00-M25L
Insert (Grade)
GY2M0600J030N-GS (VP10RT)
Work Material
Waspaloy
Cutting Speed
vc35 m/min
Feed
f0.05 mm/rev
Depth of Cut
ap10 mm
Coolant
Emulsion
Extended tool life possible because of redcued tool wear. (after 25 min. machining)
Miracle coating
Carbide substrate
(HRA92.0)
Copy Turning
GS
(Low feeds)
ENGINE
Work Materials [Ni-based Superalloy]
Key Point on Machining
Ni-based alloy machining requires a sharp edge geometry. An increase in tool life can be
achieved by using GS breaker that is specially designed to reduce cutting resistance.
Application Example
Stable machining is possible on heat resistant super alloys.
VB: 0.122 mm
Good cutting performance
